Fruits and Berries

MyConnect – Perennial Crops

Bio-Fertilizer, Mycorrhiza

MyConnect® – Perennial Crops for fruits and berries is a powerful inoculum that consists of carefully selected and pure-produced endomycorrhizae. It efficiently connects to the plant-roots system and forms an extensive underground network of interconnecting filaments, increasing nutrient absorption, marketable yields, transplants’ survival and overall crop quality.

Contains 2,000 viable spores/g of the endomycorrhizal species Rhizoglomus sp.

Crop Finder

Enter the name of your crop to find product-related information and more.

Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages
Filter by Categories

e.g., apples, lemons, strawberries, blueberries

General Information

MyConnect Professional Small Format
  • Covers


    up to 5,000 plants
  • Weight


    400 g (0.9 lb)
  • Volume


    1 L (34 oz)
  • Largest Particle Size


    0.25 mm (60 US mesh)
MyConnect Professional Medium Format
  • Covers


    up to 60,000 plants
  • Weight


    4.8 kg (10.6 lbs)
  • Volume


    12 L (3.2 gal)
  • Largest Particle Size


    0.25 mm (60 US mesh)
MyConnect Professional Large Format
  • Covers


    up to 200,000 plants
  • Weight


    16 kg (35.3 lbs)
  • Volume


    40 L (10.6 gal)
  • Largest Particle Size


    0.25 mm (60 US mesh)

Application Options & Rates

 
Fruits & Berries

Vineyards

Plantations

Nursery applications Seeding and /or cuttings: Gradually dilute 240 ml (1 cup) of product in 12 L (3.2 US gallons) of room temperature water, while mixing. Remove filters and use nozzles with a minimum of 2 mm (10 mesh) openings to avoid clogging. Apply 10 ml (2 tsp.) of diluted product per plant, directly in the seeding hole or to growth substrate around root area. Agitate frequently the product in suspension. One cup of raw product is enough to treat approximately 1,250 plants.
Mixing with growth substrate: Gradually dilute 240 ml (1 cup) of product in 25 - 50 L (6.6 -13.2 US gallons) of room temperature water, depending on the desired moisture level of the substrate, while mixing using a whisker. If using a sprayer, remove filters and use nozzles with a minimum of 2 mm (10 mesh) openings to avoid clogging. Apply diluted product to substrate. Agitate the product in suspension when spraying and ensure an even distribution in the growth substrate for optimum product homogeneity. One cup of raw product can treat up to 1 m3 (35 ft3) of growth substrate.
Field or Landscaping applications Planting holes: Gradually dilute 240 ml (1 cup) of product in 12 L (3.2 US gallons) of room temperature water, while mixing. Remove filters and use nozzles with a minimum of 2 mm (10 mesh) openings to avoid clogging. Apply 20 ml (4 tsp.) of diluted product per plant, directly to the root system or to growth substrate around root area. Agitate frequently the product in suspension. One cup of raw product is enough to treat approximately 625 plants.
Direct application on roots: Gradually dilute 240 ml (1 cup) of product in 6 litres (1.6 US gallons) of room temperature water, while mixing. Dip the roots completely into the slurry and make sure the solution sticks properly, prior to planting. One cup of product is enough to treat up to 625 plants. *Alternatively, the bare roots could be dipped directly into the product powder prior to planting.
  • The coating can increase the total volume in the seed drill. Recalibrate it to get the right seeding rate.
  • Do not mix powder with fungicide in the same tank.
  • Do not directly mix with granular or liquid fertilizer.
  • For optimal result, sow within 12 hours following treatment.

Supporting documents

  • RISEHoP mycorrhizae and pesticides compatibility chart
  • MSDS
  • Store in a cool, dry place and avoid direct sunlight.
  • Avoid repeated freeze / thaw cycles and extended exposure to temperatures above 40°C (104°F).
  • Seal the bag tightly after use.
+ Formats
MyConnect Professional Small Format
  • Covers


    up to 5,000 plants
  • Weight


    400 g (0.9 lb)
  • Volume


    1 L (34 oz)
  • Largest Particle Size


    0.25 mm (60 US mesh)
MyConnect Professional Medium Format
  • Covers


    up to 60,000 plants
  • Weight


    4.8 kg (10.6 lbs)
  • Volume


    12 L (3.2 gal)
  • Largest Particle Size


    0.25 mm (60 US mesh)
MyConnect Professional Large Format
  • Covers


    up to 200,000 plants
  • Weight


    16 kg (35.3 lbs)
  • Volume


    40 L (10.6 gal)
  • Largest Particle Size


    0.25 mm (60 US mesh)
+ Application

Application Options & Rates

 
Fruits & Berries

Vineyards

Plantations

Nursery applications Seeding and /or cuttings: Gradually dilute 240 ml (1 cup) of product in 12 L (3.2 US gallons) of room temperature water, while mixing. Remove filters and use nozzles with a minimum of 2 mm (10 mesh) openings to avoid clogging. Apply 10 ml (2 tsp.) of diluted product per plant, directly in the seeding hole or to growth substrate around root area. Agitate frequently the product in suspension. One cup of raw product is enough to treat approximately 1,250 plants.
Mixing with growth substrate: Gradually dilute 240 ml (1 cup) of product in 25 - 50 L (6.6 -13.2 US gallons) of room temperature water, depending on the desired moisture level of the substrate, while mixing using a whisker. If using a sprayer, remove filters and use nozzles with a minimum of 2 mm (10 mesh) openings to avoid clogging. Apply diluted product to substrate. Agitate the product in suspension when spraying and ensure an even distribution in the growth substrate for optimum product homogeneity. One cup of raw product can treat up to 1 m3 (35 ft3) of growth substrate.
Field or Landscaping applications Planting holes: Gradually dilute 240 ml (1 cup) of product in 12 L (3.2 US gallons) of room temperature water, while mixing. Remove filters and use nozzles with a minimum of 2 mm (10 mesh) openings to avoid clogging. Apply 20 ml (4 tsp.) of diluted product per plant, directly to the root system or to growth substrate around root area. Agitate frequently the product in suspension. One cup of raw product is enough to treat approximately 625 plants.
Direct application on roots: Gradually dilute 240 ml (1 cup) of product in 6 litres (1.6 US gallons) of room temperature water, while mixing. Dip the roots completely into the slurry and make sure the solution sticks properly, prior to planting. One cup of product is enough to treat up to 625 plants. *Alternatively, the bare roots could be dipped directly into the product powder prior to planting.
+ Recommendations
  • The coating can increase the total volume in the seed drill. Recalibrate it to get the right seeding rate.
  • Do not mix powder with fungicide in the same tank.
  • Do not directly mix with granular or liquid fertilizer.
  • For optimal result, sow within 12 hours following treatment.

Supporting documents

  • RISEHoP mycorrhizae and pesticides compatibility chart
  • MSDS
+ Storage
  • Store in a cool, dry place and avoid direct sunlight.
  • Avoid repeated freeze / thaw cycles and extended exposure to temperatures above 40°C (104°F).
  • Seal the bag tightly after use.
MyConnect Professional Small Format
  • Covers


    up to 5,000 plants
  • Weight


    400 g (0.9 lb)
  • Volume


    1 L (34 oz)
  • Largest Particle Size


    0.25 mm (60 US mesh)
MyConnect Professional Medium Format
  • Covers


    up to 60,000 plants
  • Weight


    4.8 kg (10.6 lbs)
  • Volume


    12 L (3.2 gal)
  • Largest Particle Size


    0.25 mm (60 US mesh)
MyConnect Professional Large Format
  • Covers


    up to 200,000 plants
  • Weight


    16 kg (35.3 lbs)
  • Volume


    40 L (10.6 gal)
  • Largest Particle Size


    0.25 mm (60 US mesh)

Application options

Mixing with seeds – Apply MyConnecton seeds at a ratio of 30% w/w, just prior to planting time. Mix the MyConnectpowder evenly with seeds when filling seeder. A grain auger or a dry seed treater can be used to easily blend MyConnectwith seeds or mix it directly in the hopper (or any other suitable container). It is recommended to adjust the calibration of the device to optimize the drill box filling rate.

Cuttings or bulbs treatment – Use 750 mL (3 cups) of MyConnectper hectare (2.5 acres) of sowing area. Gradually mix the required amount of product with the number of cuttings or bulbs necessary to cover the desired sowing area. Ensure a homogeneous distribution of the MyConnectpowder. A dry seed treater can be used to easily apply the product or mix in any other suitable container.

Incorporation in transplant water – Gradually dilute MyConnectat a rate of 250 ml (1 cup) per 50 L (1.4 lb per 13US gallons) of room temperature tap water, while mixing. Remove filters and use nozzles with a minimum of 1 mm (18 US mesh) openings to avoid clogging. Apply 5 ml (1 tsp) of diluted MyConnectper plant, directly to the root system or on the side/bottom of the planting hole. Agitate frequently the product in suspension while spraying.

Direct application on transplant bare-roots or root plugs – Coat the root plugs or bare roots with MyConnectpowder, just prior to planting. A quick dip of the roots or a small amount of powder will be sufficient to efficiently inoculate the plants.

  • Do not directly mix MyConnectwith fungicide in the same container (See pesticides compatibility chart).
  • It is generally recommended to apply compatible pesticides at least 2 weeks prior or 4 weeks after application of MyConnect™.
  • Do not directly mix MyConnectwith concentrated granular or liquid fertilizer in the same container.
  • It is recommended to lower the dose of start-up phosphate fertilizer until 4 weeks after MyConnect
  • It is recommended to sow within 12 hours following treatment.
  • For optimal results, use before the expiration date.
  • Store in a cool and dry place.
  • Avoid direct exposure to sunlight.
  • Do not freeze or expose to temperatures above 35°C (95°F) for an extended period of time.
  • Seal the bag tightly after use.
  • Please read MyConnect™ MSDS prior to use.
+ Formats
MyConnect Professional Small Format
  • Covers


    up to 5,000 plants
  • Weight


    400 g (0.9 lb)
  • Volume


    1 L (34 oz)
  • Largest Particle Size


    0.25 mm (60 US mesh)
MyConnect Professional Medium Format
  • Covers


    up to 60,000 plants
  • Weight


    4.8 kg (10.6 lbs)
  • Volume


    12 L (3.2 gal)
  • Largest Particle Size


    0.25 mm (60 US mesh)
MyConnect Professional Large Format
  • Covers


    up to 200,000 plants
  • Weight


    16 kg (35.3 lbs)
  • Volume


    40 L (10.6 gal)
  • Largest Particle Size


    0.25 mm (60 US mesh)
+ Application

Application options

Mixing with seeds – Apply MyConnecton seeds at a ratio of 30% w/w, just prior to planting time. Mix the MyConnectpowder evenly with seeds when filling seeder. A grain auger or a dry seed treater can be used to easily blend MyConnectwith seeds or mix it directly in the hopper (or any other suitable container). It is recommended to adjust the calibration of the device to optimize the drill box filling rate.

Cuttings or bulbs treatment – Use 750 mL (3 cups) of MyConnectper hectare (2.5 acres) of sowing area. Gradually mix the required amount of product with the number of cuttings or bulbs necessary to cover the desired sowing area. Ensure a homogeneous distribution of the MyConnectpowder. A dry seed treater can be used to easily apply the product or mix in any other suitable container.

Incorporation in transplant water – Gradually dilute MyConnectat a rate of 250 ml (1 cup) per 50 L (1.4 lb per 13US gallons) of room temperature tap water, while mixing. Remove filters and use nozzles with a minimum of 1 mm (18 US mesh) openings to avoid clogging. Apply 5 ml (1 tsp) of diluted MyConnectper plant, directly to the root system or on the side/bottom of the planting hole. Agitate frequently the product in suspension while spraying.

Direct application on transplant bare-roots or root plugs – Coat the root plugs or bare roots with MyConnectpowder, just prior to planting. A quick dip of the roots or a small amount of powder will be sufficient to efficiently inoculate the plants.

+ Recommendations
  • Do not directly mix MyConnectwith fungicide in the same container (See pesticides compatibility chart).
  • It is generally recommended to apply compatible pesticides at least 2 weeks prior or 4 weeks after application of MyConnect™.
  • Do not directly mix MyConnectwith concentrated granular or liquid fertilizer in the same container.
  • It is recommended to lower the dose of start-up phosphate fertilizer until 4 weeks after MyConnect
  • It is recommended to sow within 12 hours following treatment.
  • For optimal results, use before the expiration date.
+ Storage
  • Store in a cool and dry place.
  • Avoid direct exposure to sunlight.
  • Do not freeze or expose to temperatures above 35°C (95°F) for an extended period of time.
  • Seal the bag tightly after use.
  • Please read MyConnect™ MSDS prior to use.

MyConnect® Technology

Mycorrhizae Hyphen

MyConnect® creates an extensive network of root-like extensions that gives the plant a maximized access to nutrients essential to its growth. MyConnect:

  • Boost marketable yields
  • Grow stronger and healthier plants
  • Generate more profit per harvest

OMRI Listed

OMRI

RISEHoP Mycorrhiza is Organic Materials Review Institute (OMRI) listed in Canada and in the U.S., and may now be used in certified organic production according to the Canada Organic Regime and the USDA National Organic Program.

As per OMRI’s website, “OMRI supports organic integrity by developing clear information and guidance about materials, so that producers know which products are appropriate for organic operations”.