Application options
Mixing with seeds – Apply MyConnect™ on seeds at a ratio of 30% w/w, just prior to planting time. Mix the MyConnect™ powder evenly with seeds when filling seeder. A grain auger or a dry seed treater can be used to easily blend MyConnect™ with seeds or mix it directly in the hopper (or any other suitable container). It is recommended to adjust the calibration of the device to optimize the drill box filling rate.
Cuttings or bulbs treatment – Use 750 mL (3 cups) of MyConnect™ per hectare (2.5 acres) of sowing area. Gradually mix the required amount of product with the number of cuttings or bulbs necessary to cover the desired sowing area. Ensure a homogeneous distribution of the MyConnect™ powder. A dry seed treater can be used to easily apply the product or mix in any other suitable container.
Incorporation in transplant water – Gradually dilute MyConnect™ at a rate of 250 ml (1 cup) per 50 L (1.4 lb per 13US gallons) of room temperature tap water, while mixing. Remove filters and use nozzles with a minimum of 1 mm (18 US mesh) openings to avoid clogging. Apply 5 ml (1 tsp) of diluted MyConnect™ per plant, directly to the root system or on the side/bottom of the planting hole. Agitate frequently the product in suspension while spraying.
Direct application on transplant bare-roots or root plugs – Coat the root plugs or bare roots with MyConnect™ powder, just prior to planting. A quick dip of the roots or a small amount of powder will be sufficient to efficiently inoculate the plants.